Thus, this value serves as a calculation tool only, not a link. Note: The Bottom Elevation shows the current elevation of the Wall bottom.

Note: Reference levels are defined at Options > Project Preferences > Reference Levels.įor general information on levels, see Reference Levels Preferences. Click the pop-up arrow to change the Reference level, if needed. If you change a Wall’s elevation so that its reference line is moved to a different story, you have the option to make the Home Story change to match the element’s new location.īottom Elevation : Calculates the current elevation of the Wall’s reference line, as measured from the Reference level (by default, this Reference level is Project Zero). If you delete the Wall’s Home Story, the Wall will be deleted, along with all other elements located on the story. redefine the floor level), the Wall will change its position (while respecting the defined offset, if any). If you later modify the Home Story’s position (e.g. The bottom of the Wall (where the Wall reference line is) is physically linked to its Home Story. (For a top linked Wall, the Wall height changes accordingly.)

Optionally, define an offset for the Wall bottom from its Home Story.

Click Select Story to bring up the full list of stories in the project, if they are not all shown in the list.

Choose a story to which to link the bottom of the Wall.

The current story: The Wall’s Home Story will be the current story, on which it is placed.

The Wall height value is affected by the top and bottom offsets, if any.Ĭhoose one of the following Home Story settings:.

(For a top linked Wall, this field is not editable.) Wall height: Enter a value for the total height of the Wall. The offset field is not available if the Wall has no top link. This offset value can be positive, negative or zero.

Optionally, define an offset for the Wall top from its top linked story (the Wall height changes accordingly).

If you later modify the positions and heights of stories in your projects, the heights of any linked Walls will follow automatically. Wall top: Use this control to either top link the Wall relative to its Home Story (Home+1, Home+2, etc.), or to make it a fixed-height wall (choose “Not linked”). Use the controls in this panel to change any of these values, and to define the geometry and complexity of the Wall element. The story to which the Wall bottom is linked is called the Home Story, but you can offset the bottom in either direction.

For a description of generic settings common to all tools in the Toolbox, see Working in Tool Settings Dialog Boxes.

Change texture size in rhino 6